Union Wall Mount Snowboard Holder

Turn your snowboard collection into a wall-worthy display. Union Wall Mount Snowboard Holders are easy to install and built to securely showcase your boards—getting them out of the closet and onto the wall where they belong.

Installation

Tools Needed:

Drill
4 mm Drill Bit
Tape Measure
Level
Screw Driver

Steps:

1. Choose the wall location and height that you’d like your snowboard to be at. (The board should rest near the top inserts)

2. Measure the width of your snowboard at the top inserts.

3. Using the measurement from above, mark the two pilot holes with a pencil.

4. Use a level to ensure the mounting holes are even.

5. Drill your pilot holes.

6. Insert the drywall anchor into the pilot holes.

7. Hand screw each wall mount into place.

8. Load your board by inserting it at the narrowest point and gently slide into place.

9. If needed, loosen the screw to adjust the width of the hangers based on where you want your board to rest.

10. Place the rubber cover onto the hanger.

11. Step back and admire your beautiful snowboard display.